PERFORMANCE |
Voltage: |
nominal 12/24V |
Voltage: |
operating 12/24V |
Signal Source: |
Engine Electronic Control Module (ECM) |
VIBRATION |
Operating: |
0.5G |
Storage: |
50G |
TRANSIENT VOLTAGE |
Withstands voltage transients of 200 Volts for 300 microseconds duration (SAE J1810) |
OVER VOLTAGE PROTECTION |
Tested with a supply voltage for 20 Volts for 1 hour. |
Reverse polarity protected. |
CORROSIVE GAS |
NOT ACCEPTABLE. |
|
TEMPERATURE
Tested at the following operating ranges: |
A. If being used as a rear engine run box |
Operating: |
-4°F to 158°F |
Storage: |
-22°F to -176°F |
(-30°C to 80°C) |
B. For use as a diagnostic tool |
Operating: |
32°F to 122°F |
Storage: |
-4°F to 158°F |
(-20°C to 70°C) |
SHOCK |
Operating: |
3G |
Storage: |
50G |
LOAD DUMP |
Meets (SAE J113) three positive 80 Volt transients with one minute intervals. |
SALT SPRAY |
NOT ACCEPTABLE. |
|